The Beast

  • The Beast package - The Beast 3-axis brushless gimbal ready for handheld operations.
  • The Beast
  • The Beast
  • The Beast
  • The Beast
  • The Beast
Producer: ACR Systems
status_icon
€6 383,70
5190.00 / net6383.70
/ 1itemincl. VAT excl. Shipping costs
In stock

 

2 years warranty | Limitless support

 

ACR The Beast is a camera stabiliser based on the operation of brushless motors, several precise sensors and sophisticated control firmware. Complex and simply difficult shots and takes, which often required huge efforts including the usage of advanced CGI or custom, expensive, built-from-scratch rigs, become a child’s play with The Beast. Even the most demanding scenes will come out completely stable with the horizon on perfect position – where every operator wants it to be. The compatibility with various additional equipment allows for shots that were impossible to film before. Every professional operator will greatly appreciate the possibilities of working with The Beast not only while handheld but in pair with cranes, multirotor drones, in Inverted Mode and many other options. The creativity is the ultimate limit. The gear of dreams of professional DoPs and operators is within reach – ready to go after only a few minutes of preparation.

 

V2

Thanks to feedback we received from users of genuine The Beast gimbals, the new V2 edition was equipped with new electronics and LEMO connectors. High quality cables and a new powering system are capable now to run without generating significant amounts of heat during daily work with RED cameras. A number of additional improvements were implemented in the stabilization software. A precise Autotune algorithm, a balance check system, three different Follow profile algorithms, autotrimming for Thumbstick and remote controllers – these are only a few new Beast capabilities. Iconic functionalities remain unchanged – an incredible OnBoard Manager with keyboard, voice messages and the OLED screen allows to configure basic and advanced settings in a blink of an eye. Even with the RED Dragon, The Beast equipped with large battery is able to power both gimbal and camera for one and a half hour. Easy to run, full of settings for professional users – a dreamed-of equipment for medium camera users.

 

Devices

Three-axial stabilisation is not a simple task. Many of the devices available on the market offer varying results. We are not afraid to tell our Users – use long focal lengths! Run, jump, travel quickly with The Beast! The hybrid technology will make sure that your shots are genuinely cinematic and first of all – stable.

Three motors are responsible for the three axis of rotation. Each motors includes an angle encoder – a type of sensor allowing to count the angle of rotation of each axis in real time with the precision of hundredths of a degree. Additional two three-axial gyroscopic sensors and accelerometers monitor the horizon level to be maintained at all times during operation. Twin powerful Cortex microprocessors do the processing of all this data and along with some advanced coding turn a shaking run of an operator into a beautiful, clean take.
Some clever design of the mechanical elements of The Beast was required in order for the electronics to work as desired and deliver such results. The motors were custom-built for The Beast to match our requirements of maximum power and super-fluent transitions between various camera angled positions, The construction is exceptionally solid and compact thanks to the usage of various aluminum alloys, inter alia the very rigid 7075 aluminum and carbon fiber. A special type of finish – the technical anodization – gave a beautiful, matt look to the whole concept. This results in the device not shining due to external light sources during a shot when it is absolutely necessary to not produce any glare.

 

The Beast

Can be powered from standard, small Li-Ion batteries fitting inside a dedicated compartment within the stabilizer pan axis tubes or a large Li-Po battery dedicated to power up, for example, a a stabilizer and a camera together. The Beast itself can work on the small batteries alone for more than 10 hours! The Intelligent Charger with built-in balancer allows to charge both types of batteries with correct settings. Another unique feature is that various external accessories can also be powered up straight from the main power source via two auxillary power outputs – on the vertical arm and on the camera tray. Such accessories include wireless follow focus systems, wireless video transmission and the camera itself. The power management is very efficient and allows for powering up even a RED Epic camera along with accessories when using the large battery or an external professional VMount or Anton-Bauer Battery, which can even be placed off the actual gimbal rig with an extension cable (for example in an operators Belt Bag ) to save precious weight!

The back of the gimbal houses another great feature – a small OLED screen and a control panel connected with our unique OnBoard Manager software. This allows for full configuration without any kind of external input! The Beast also tells you about the current configuration, running profile, battery status and many other things with its own voice – it is a talking gimbal! The OLED screen is very bright and clearly visible even in full sun. The magic of The Beast resides here – you have complete control over this amazing piece of engineering just using this small screen and keyboard. You have direct access to every important function either during the preparation process or during live shots – everything only takes seconds to set! This feature almost completely voids the need of using any computers or tablets to set the gear up. It all becomes plug’n’play & easy – setting a new standard!

 

The electronics

The electronics can be very complex but what matters for the end user is the simplicity of usage. In case of The Beast you do not have to deal with strange parameters of Ps, Is and Ds or similar, as the other gimbals require to have set and tuned for the best results. Our solution has only three power sliders setting the motors performance. That’s it! The things got even simpler after we introduced special algorithms that setup the powers for you during a few moments of the Autotune procedure. Using a stabilizer has never been so easy!

 

Operating modes

The unique, very characteristic operating mode for the handheld user, the famous Follow Mode, allows you to catch smooth, cinematic takes based on a very responsive and fluent natural movement control system. Additionally the camera position can be controlled via a dedicated Thumbstick or using an external remote control equipment.

The Beast can work in various states thanks to some special stabilization and control coding. The basic operating mode is the Xtended Stabilization – a mode which keeps the camera position in one place and facing one point in space regardless of the gimbal position. This behavior is usually used in pair with remote movement control on multirotor drones, cranes, JIBs. You can always switch to the smooth Follow Mode where the stabilizer follows your movements with a configurable delay and removes unwanted jitter and leaning in real time. This function can be toggled on all three axis separately.

Each of the movement control options can be used in a special and very comfortable global mode called Inverted Mode. In this mode The Beast is working upside down and the camera is above the handheld module. This allows for some convenient, natural eye-level shooting without introducing too much fatigue to the operator’s arms. Many users also use the built-in camera feedback screens instead of external ones in this mode. The Inverted Mode is also commonly used when The Beast is attached to RC cars, JIBs and other uncommon platforms.

You can also control The Beast via a cabled, analog Thumbstick or using external remote control devices, such as Graupner radios.

 

Compatibility

The Beast was successfully tested to work with the following cameras:

  • RED Weapon
  • RED EPIC
  • RED Scarlett
  • Sony FS700*
  • Sony FS7*
  • Sony F5*
  • Sony F55*
  • Sony A7S/R
  • Canon C100
  • Canon C300
  • Canon 5D
  • Panasonic GH4
  • Blackmagic Production Camera 4K

* - balancing depends on configuration. Long setups may require counterweights.

  

Unique features

  • The most advanced digital stabilizer on the market
  • Silent brushless motors with high-resolution, built-in encoders
  • Advanced, hybrid electronics (gyroscopic sensors, accelerometers and encoders)
  • Incredible precision of stabilization with extremely high accuracy
  • The ability to provide up to 6A/12V or 5A/16.8V of auxiliary power from the vertical arm and camera tray LEMO outputs to power up external accessories
  • High power output on camera shelf and vertical arm capable of powering RED cameras
  • Embedded OnBoard Manager: OLED screen, speaker and built-in 5 button directional keypad for quick and easy configuration via OnBoard Manager
  • Intuitive and powerful ACR Manager software
  • Bluetooth and USB connectivity
  • Completely tool-less camera balancing system
  • Self-balance test
  • Highly sophisticated autotune algorithm
  • Versatility of the working modes: Xtended Stabilisation, organic and smooth Follow Mode, real Inverted mode for natural camera position
  • Rigid and lightweight aluminium and carbon construction - weights only 2,95 kg (6.5 lb)!
  • Maximum payload of 6 kg (13.23 lb)
  • Thumbstick and Remote Control Units available
  • Compatible with PWM radios, The Grip and The Link Kinetic Interface Devices
  • Highly comfortable triple grip handlebar – the Handheld Module
  • Tool-less rotatable, 8-position side handles
  • Ability to quickly detach the Handheld Module via the Lock and Load Connector and use The Beast on other platforms
  • Original, in-house project concept
  • 2-year limited warranty
  • Proudly made in Europe
  • Personal Customer Service
Tech specs:
Size and weight
Complete unit weight:
2.95 kg
,
6.5 lb
Without Handheld Module:
2.4 kg
,
5.29 lb
Maximum payload:
6 kg
,
13.23 lb
Handheld width:
540 mm
,
19.84 inches
Camera shelf width:
204 mm
,
8 inches
Camera shelf height (from tilt axis):
100 mm
,
3.93 inches
Camera shelf fork depth (from tilt axis):
190 mm
,
7.48 inches
Power
Type of supported batteries:
Small batteries (twin, connected via embedded JST connectors)
,
Large batteries (connected via LEMO 0B Size 2-pin female connector on vertical arm)
,
External power input (12-16.8V connected via LEMO 0B Size 2-pin female connector on vertical arm)
Small batteries runtime:
up to 13 hours depending on payload (value based on Camera powered independently)
Large batteries runtime:
up to 16 hours depending on payload (value based on Camera powered independently)
Power output:
Double (0B Size 2- pin female connector output on camera shelf, LEMO 0B Size 2-pin female connector output on vertical arm)
,
Voltage depends on battery type
,
6A at 12V, 5A at 16.8V
Package contents
3-axis stabilizer:
Included
Handheld module:
Included
Stand:
Included
Charger:
Included
Batteries:
Included, 2x small type
Cables:
USB cable
Accessoriums:
Accessorium Type A
Remote control:
Not included
Peli case:
Included
15mm Rods :
Not included
Thumbstick:
Not included
Multirotor/crane adapter:
Not included
Features
Follow mode:
Tilt
,
Roll
,
Pan
,
Xtended Stabilisation (Follow Mode off)
Tool-less balancing:
Supported
Connectivity:
Bluetooth
,
USB
,
6-pin PWM/S.BUS socket
,
Thumbstick
,
3x CAN bus
Real Inverted Mode:
Supported
OLED screen:
Embedded
Speaker:
Embedded
Keyboard / buttons:
5-button keyboard
Encoders:
Embedded
Sensors:
2x IMU
,
3-axial gyro
,
3-axial accelerometer
Processors:
2x 32-bit MCU
Materials:
Aircraft grade aluminium
,
Spaceship grade aluminium
,
Carbon fibre
,
Nanopolymer
,
Steel
Rotatable side handles:
Yes, 8-position, tool-less
You should see also...
Lock'n'Load V2 handheld upgrade kitLock'n'Load V2 handheld upgrade kit
€297,00 net
€365,31 incl VAT
Battery chargerBattery charger
€39,00 net
€47,97 incl VAT
Remote Control Unit PulpitRemote Control Unit Pulpit
€49,00
€36,75 net
€45,20 incl VAT
Large batteryLarge battery
€149,00 net
€183,27 incl VAT
Lock'n'Load V2 external sideLock'n'Load V2 external side
€107,00 net
€131,61 incl VAT
USB cableUSB cable
€5,00 net
€6,15 incl VAT
Accessorium – Type AAccessorium – Type A
€49,00 net
€60,27 incl VAT
15mm Rods Adapter15mm Rods Adapter
€79,00 net
€97,17 incl VAT
Ask for this product:

If this description is not sufficient, please send us a question to this product. We will reply as soon as possible.

Your e-mail:
This field is required for placing an order.
Question:
This field is required for placing an order.
fields marked with - This field is required for placing an order. - are required
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.
Close
pixel